Fluid Film Journal Bearings - Journal bearings available in ball and socket de- signs, tilt pad designs, fixed profile designs, com- bination designs and custom configurations for all makes and models of turbomachinery.
4 Point Contact Slew Rings - The internal configuration consists of deep groove gothic arch raceways and maximum ball complement. This results in a four-point contact design that provides exceptional moment, thrust, and radial load capacities.
Fluid Film Thrust Bearings - Thrust bearings available in ball and socket designs, tilt pad designs, fixed profile designs, combination designs and custom configurations for all makes and models of turbomachinery.
8 Point Contact Slew Rings - Provide maximum load capacity for given envelope and bolt circle diameters. They provide up to an 80% increase in capacity over single-row four-point designs of the same diameter and bolt circles with a smaller profile.
Spherical Fit Bearings - Spherical O.D. fit bearings available in ball and socket designs, tilt pad designs, fixed profile designs, combination designs and custom con- figurations for all makes and models of turbomachinery.
3 Row Roller Slew Rings - The 3 Row bearings have three independent rows of rollers oriented normal to the direc- tion of loads being transmitted through the bearing. Their orientation is selected to optimize capacity, provide low frictional re- sistance and minimize deflection.
Thermoplastic Seals - The most successful thermoplastics for labyrinth seals are polyether ether ketone (PEEK), polyamideimides (PAI) TORLON, and polytetrafluoroethylene (PTFE) FLOUROSINT compounds.
Cross Roller Slew Rings - Cross roller bearings provide a high degree of stiffness and low rotational torque within a minimal envelope. They are ideal when a four-point contact ball bearing does not meet operating performance requirements for torque and stiffness.
Labyrinth Seals - Labyrinth compressor seals, Wind back seals Balance piston seals, Oil deflectors, Steam tur- bine seals, Honeycomb seals, Carbon seals, Hydrogen seals, Babbitted oil seals
Cylindrical Roller Bearings - Cylindrical roller bearings provide the highest possible radial and axial load capacity compared to other roller types. Available in single or multi row configurations
Angular Contact Ball Bearings - Angular contact ball bearings have raceways in the inner and outer rings that are displaced relative to each other in the direction of the bearing axis. This means that they are designed to accommodate combined loads, i.e. simultaneously.
Tapered Roller Bearings - Uniquely designed to accommodate both axial and radial loads on rotating shafts and housings. Available in inch and metric series in single row, double row and four row tapered configurations.
Slewing Drives - Enclosed Slew Drives help power movement across industries and are perfect for situations requiring both load-holding and rotational torque from the same gearbox.
Spherical Roller Bearings - Spherical roller bearings have two rows of rollers, a common sphered outer ring raceway and two inner ring raceways inclined at an angle to the bearing axis. They are self-aligning and designed to accommodate misalignments.